Quality & Safety · ManufactINS
Non-Conformance
NCRs from detection through containment, root cause and verified closure — with the closed NCRs most like each one and a 5-Why draft that cites them.
What changed in Non-Conformance recently
New · Release 2.31 · 19 November 2026
Non-Conformance and CAPA: each open NCR now shows the three closed NCRs most like it — with their recorded root cause, the action taken and whether the defect came back — and can draft a 5-Why that cites them; each CAPA is tested on its NCRs before and after the fix, and says whether recurrence really fell.
New · Release 1.0 · 27 September 2026
Quality: inspections and first-pass yield, Non-Conformance and CAPA, with the recorded root cause and a check that each fix worked.
Pages that cover Non-Conformance
- MES software for the shop floor — and the decisions above itThe MES core most plants start with — jobs, clock-in, downtime, NCRs, order routes — alongside a full MES where one runs.
- Quality management software for manufacturing: NCR to CAPANCRs with photos and disposition, closed with a root cause and CAPA; first-pass yield and the defect Pareto.
- Manufacturing traceability software, from maker to customerAny lot, heat or batch traced from maker to customer, with its certificate and recall scope to the unit.
More in Quality & Safety
- QualityIncoming, in-process and final inspection, first-pass yield and defect categories.
- CAPACorrective and preventive actions, with the recorded root cause and a test of whether each fix lowered the defect’s recurrence.
- TraceabilitySupplier batch to finished product — full genealogy, lot and serial, for instant recall scope.
- Health & SafetyIncidents, near misses, LTIFR and TRIR, permits to work, toolbox talks and the corrective actions still open.